foomatic-rip - Universal print filter/RIP wrapper
General Options:--> foomatic-rip [-v] [-q] [-d] <filter specific options>
Spooler-less printing/CPS (older versions) filter:\fR \ --> foomatic-rip [-P <printer> | --ppd <ppdfile> ] [-J <jobtitle> ] [-o <option>=<value> [...]] [<files>]
CUPS filter:\fR \ \fI
\fR \ \fI \fR \ \fI \fR \ \fI \fR \ \fB[\fI \fB]\fR --> foomatic-rip <jobid> <user> <jobtitle> <numcopies> <options> [<file>]
LPRng filter:\fB]\fR \fB[\fB-Z\fI
foomatic-rip is a universal print filter which works with every known free software printer spooler. It has the following features:
.Topic It translates PostScript (and also other file formats) from standard input to the printers native language (usually put to standard output).
.Topic The translation is done with an external renderer, usually GhostScript (gs(1)). If no translation is needed (PostScript printer) the renderers command line reduces to cat(1). The way how this translation is done is described in a PPD file.
.Topic Printer capabilities, how to handle user options, and how to build the renderer command line is always described by PPD files, these PPD files can come from Foomatic or can be the ones supplied by the manufacturers of PostScript printers. The PPD files are the same for all spoolers.
.Topic foomatic-rip works with every known spooler (CUPS, LPRng, LPD, GNUlpr, PPR, PDQ, CPS, and without spooler). It auto-detects the spooler from which it was called by the command line options and environment variables which were supplied by the spooler.
.Topic Non-PostScript files are translated to PostScript before they are passed to the renderer. This is usually done by a2ps(1), enscript(1), or mpage(1). foomatic-rip auto-detects which program is installed, but manual configuration is also possible.
.Topic foomatic-rip does not only apply option settings supplied by the user through the command line of the printing command, but also searches the entire job for embedded option settings (only PostScript jobs). Here not only settings affectimg the whole job are taken into account, but also settings in the page headers, which are only valid for the page where they were found, so applications which produce PostScript code with page-specific printer option settings are fully supported.
foomatic-rip will print from standard input unless a file to print is specified on the command line. If your printer PPD file is stored as /etc/sfw/direct/<printer>.ppd or ~/.foomatic/direct/<printer>.ppd you can use it by simply specifying "-P <printer>".
-v verbose mode for debugging. WARNING: This will create a file in /tmp that contains the debugging information. This opens a security loophole and should not be used in production.
-q quiet mode - minimal information output
-d identical to the opts option, but option information is left in text format. This is useful for running foomatic-rip from the command line to determine what the printer option are. The PPD file will need to be specified using the --ppd option.
--> -P <printer> <printer> is the configured printer which should be used for this job.
--> --ppd <ppdfile> The PPD file <ppdfile> should be applied for processing this job. --> -J <jobtitle> The <jobtitle> will be printed in the head line of every page of a plain text job. \fB=\fI \fR --> -o <option>=<value> Option settings for this job, do
\fR \fB-o docs \fI
\fR --> foomatic-rip -P <printer> -o docs <file>
(<file> can be an arbitrary existing file, as .bashrc, will not be printed) to print a list of available options for the specified <printer>.
\fR --> <files> The file(s) to be printed.
Put a line
*FoomaticRIPPostPipe: "| <command>"
into the PPD file, right after *PPD-Adobe: "4.3", where <command> is a command into which you wnat to re-direct the output data. Due to the restictions of PPD files <, >, and " are not allowed in the <command>, replace them as follows:
.CodeSkipCharacter Replacement --------------------- < < > --> > > " ' & &
This way you can print directly to your printer, use
*FoomaticRIPPostPipe: "| cat > /dev/lp0"
*FoomaticRIPPostPipe: "| cat > /dev/usb/lp0"
for local parallel or USB printers. To make normal users able to print this way add them to the group lp and make sure that the appropriate printer device file /dev/... is group-writable for the lp group.
for a TCP/Socket/JetDirect printer with the host name printer listening on port 9100 you need this:
*FoomaticRIPPostPipe: "| /usr/bin/nc -w 1 printer 9100"
Note the "-w 1" in the "nc" command line, it makes "nc" exiting immediately after the data is tranferred to the printer.
*FoomaticRIPPostPipe: "| rlpr [email protected]"
directs your jobs to the LPD printer queue lp on the machine named printserver.
See also http://www.linuxprinting.org/direct-doc.html
See the documentation on the Linux Printing Web site: http://www.linuxprinting.org
The PPD files of the currently defined printers
foomatic-rip returns 0 unless something unexpected happens.
Till Kamppeter <[email protected]> with parts of Manfred Wassmannss <[email protected]> man pages for the Foomatic 2.0.x filters.
None so far.
Please send bug reports to [email protected]
See attributes(5) for descriptions of the following attributes:
ATTRIBUTE TYPE ATTRIBUTE VALUE Availability SUNWffiltersu SUNWffiltersr Interface Stability External
Source for foomatic-filters is available on http://opensolaris.org.
|Foomatic Project||FOOMATIC-RIP (1)||2002-11-26|